ElEctric
MODEL HS4N Slicer SAVE THESE INSTRUCTIONS GENERAL The HS4N Slicer is equipped with a 1/ 2-hp motor and is available for single-phase electrical service. The slicer features a 13' diameter contoured knife. The slicer is furnished with a cord and plug as standard equipment. 1 ACCESSORIES AND OPTIONS.
- Title: Cook Works Super Slicer Manual Created Date: 8/23/2016 3:13:57 PM.
- Slice food quickly and accurately with this Nesco food slicer. The detachable stainless steel serrated blade slices meat, bread, fruit, vegetables and even large amounts of cheese in a range of thicknesses. A 180W motor and die-cast aluminum housing make this Nesco food slicer a durable and functional product for any kitchen.
Food SlicEr
42787
SEt up And opErAting inStructionS
Visit our website at: http://www.harborfreight.com
read this material before using this product.
Failure to do so can result in serious injury.
SAVE thiS mAnuAl.
Copyright
©
2000 by Harbor Freight Tools
®
. All rights reserved. No portion of this manual or any artwork
contained herein may be reproduced in any shape or form without the express written consent of
Harbor Freight Tools. Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein. Tools required for
assembly and service may not be included.
For technical questions or replacement parts, please call 1-800-444-3353.
Revised Manual 09j
4
Electric Food Slicer
BEFORE OPERATING YOUR SLICER
Before operating your slicer for the first time, disassemble and
clean, (see page 5).
1. Be sure slicer is unplugged. Place assembled slicer on a
flat, dry surface. Position slicer in front of you so that
the Thickness Knob is on your left and the Pusher is on
your right.
2. Check that the slicer is turned Off. Do not plug it in yet.
3. Be sure the blade is tightly in place. (See Removing the
Cutting Blade
on page 5). The Platform should glide
smoothly on its track. When using the slicer for the first
time, the Platform may need a few drops of vegetable
oil.
4. Remove the Pusher. Cut food to proper size before
placing on the Platform. Place food on Platform.
Position the Pusher on the back edge of the Platform.
Place your hand so your fingers align with the grooves
inside the pusher. Do not allow any food to hang over
the Platform.
Note: Meats and cheeses slice better when chilled.
5. Position the Thickness Knob for desired slice thickness.
Turn the knob counter clockwise for thicker slices,
clockwise for thinner slices.
BEGIN SLICING
1. Plug the cord into a 120 Volt AC outlet.
2. Press On/Off Switch to start the slicer.
3. Allow slicer to run for thirty seconds to warm up.
4. Grasp the Pusher with right hand, keeping your thumb
protected behind the Pusher. Apply even pressure for
best slicing results.
5. Move the Pusher towards the Blade. Move back and
forth steadily and easily with even pressure. Repeat for
additional slices.
6. When finished slicing, press the On/Off Switch to
stop the Blade from turning. Unplug from outlet.
7. The slicer can operate continuously for 10 minutes,
E30 Food Slicer User Manual Pdf Online
after which it should be turned off and allowed to cool.
E30 Food Slicer User Manual Pdf 2 8
8. Always align the thickness guide with the cutting blade
after use.
User Manual
CAUTION!!!
Blade is very sharp and can cause severe lacerations!